Electrical Specifications
- Voltage Source: 0-5 Volts
- Minimum Current Source: depends on application.
- Voltage Returned by Sensor: depends on application.
|
Cable Specifications
- Electrotap P/N: CAB-RJ11-6
- Standard 6 foot (approximately 2 meter), 6 conductor RJ11/Telephone cable.
- Color: White
- RJ11 connector layout (teabox end):
- Pin 1: 5 Volts
- Pin 2: Sensor 1
- Pin 3: Sensor 2
- Pin 4: Sensor 3
- Pin 5: Sensor 4
- Pin 6: Ground
- RJ11 connector layout (sensor end):
- Pin 1: Ground
- Pin 2: Button S1
- Pin 3: Button S2
- Pin 4: Button S3
- Pin 5: Button S4
- Pin 6: 5 Volts
|
Application Examples
- For any application where it is desireable to have an RJ11 line split into 4 separate generic inputs.
- Any custom circuitry may be soldered directly to the board, or may use the 4 3-pin headers which are provided.
Application Notes
- ALWAYS carefully test all custom circuits thoroughly with an ohm meter prior to giving the circuit power. Especially be sure to check that there is resistance between power and ground. SHORT CIRCUITS MAY DESTROY YOUR INTERFACE.
|
