Sensing Specifications
- Photoconductive Photocell manufactured by Photonic Detectors, Inc.
- Response Range: Visible light spectrum, 1-100 lux.
- Response Time: 25-60ms.
Electrical Specifications
- Voltage Source: 0-5 Volts
- Minimum Current Source: 5mA
- Voltage Returned by Sensor: Industry Standard 0.25 Volts to 4.75 Volts, fully conditioned and buffered.
- Connector Layout (Pin 1 is indicated by an arrow on the top of the connector)
- Pin 1: Ground (from interface )
- Pin 2: Sensor Output
- Pin 3: 5 Volts (from interface)
|
Cable Specifications
- Electrotap P/N: CAB-MX2LF3-3
- Standard 3 foot (approximately 1 meter) premium quality Canare L-4E5C star-quad cable with braided shielding.
- Sensor-end connector is our standard, female locking Molex connector. Interface-end connector is top-of-the-line Neutrik XLR connector.
- Molex connector layout:
- Pin 1: Ground
- Pin 2: Sensor Output
- Pin 3: 5 Volts
- XLR connector layout:
- Pin 1: Ground
- Pin 2: 5 Volts
- Pin 3: Sensor Output
|
Application Examples
- Ambient lighting of an environment.
- Triggering based on the interruption of a light source
- Indication of proximity to a source, based on how much light is being blocked or provided by the source.
- Applications recommended by the component manufacturer:
- Camera Exposure
- Low Light Level
- Shutter Control
- Night Light Controls
|
