Sensing Specifications
- iMEMs Gyroscope manufactured by Analog Devices, Inc.
- Response Range: +/- 300û/s
- Response Time: 20ms.
Electrical Specifications
- Voltage Source: 5 Volts
- Minimum Current Source: 6mA
- Voltage Returned by Sensor: Industry Standard 0.25 Volts to 4.75 Volts, fully conditioned and buffered.
- Connector Layout for Molex connector (Pin 1 is indicated by an arrow on the top of the connector) Second Molex connector must be requested.
- Pin 1: Ground (from interface)
- Pin 2: Sensor Output, Gyroscope
- Pin 3: 5 Volts (from interface)
- Pin 1: Ground (from interface)
- Pin 2: Sensor Output, Temperature
- Pin 3: 5 Volts (from interface)
- Connector Layout for RJ11 connector
- Pin 1: Ground (from interface)
- Pin 2: Sensor Output, Gyroscope
- Pin 3: Sensor Output, Temperature
- Pin 4: Unused
- Pin 5: Unused
- Pin 6: 5 Volts (from interface)
|
Cable Specifications
- Electrotap P/N: CAB-MX2LF3-3
- Standard 3 foot (approximately 1 meter) premium quality Canare L-4E5C star-quad cable with braided shielding.
- Sensor-end connector is our standard, female locking Molex connector. Interface-end connector is top-of-the-line Neutrik XLR connector.
- Molex connector layout:
- Pin 1: Ground
- Pin 2: Sensor Output
- Pin 3: 5 Volts
- XLR connector layout:
- Pin 1: Ground
- Pin 2: 5 Volts
- Pin 3: Sensor Output
- T304B- Standard RJ11, 6-6 cabling.
|
Application Examples
- Detecting motion or changes of speed
- Tracking gestural energy
- Tracking vertical motion w/o gravitational interference
- Make a helicopter. (Go for it you crazy fool!)
- Applications recommended by the component manufacturer:
- Navigation
- Image Stabilization
- Inertial measurement units
- Platform Stabilization
|
